Skip to navigation Skip to content

Console Faders


Avolites Consoles - what fader
Console Master Fader Preset Fader
Pearl Tiger 08-01-0400 08-01-0200
Pearl Expert 08-01-0400 08-01-0510
Tiger Touch 1/2/Pro 08-01-0600 08-01-0510
Tiger Touch Wing 08-01-0400 08-01-0510
Titan Mobile 08-01-0510 

Titan Mobile Wing 08-01-0510  
Quartz 08-01-0510  
Arena 08-01-0600 08-01-0510
Sapphire Touch 08-01-0800 08-01-0800
Sapphire Touch Wing 08-01-0800
08-01-0800
Sapphire Media 08-01-0800 08-01-0800
Diamond 4
Classic/Vision/Elite
08-01-0400 08-01-0500
Diamond 2/3 08-01-0006 08-01-0200
Diamond 1 08-01-0006 08-01-0001
Sapphire 2000 08-01-0400 08-01-0300
Sapphire 2000
from Nov 2002
08-01-0400 08-01-0600
Sapphire 97
late consoles
(see note 1)
08-01-0006 08-01-0200
Sapphire 97
early consoles
(see note 1)
08-01-0006 08-01-0001
Pearl 2000
type B above s/n 1435
(see note 2)
08-01-0300 08-01-0200
Pearl 2000
type A before s/n 1434
(see note2)
08-01-0200 08-01-0200
Pearl 2004
(above PRL 2234)
08-01-0400 08-01-0200
Azure 2000 Touch 08-01-0200  
Azure 2000 Shadow 08-01-0300  
QM consoles 08-01-0006 08-01-0001
80/100 consoles 08-01-0006 08-01-0001
RQ 30/60 consoles
P&G mastering
08-01-0006 08-01-0001
RQ 30/60 consoles
non P&G mastering
08-01-0001 08-01-0001
 
Fader types Part Knob
Narrow 08-01-0200 08-01-00xx
Wide 08-01-0300 08-01-00xx
Ruwido 08-01-0001 08-01-1000 
Sellmark 08-01-0400 08-01-0035
Black short
original
08-01-0500 08-01-00xx
Black short
short shaft
08-01-0510  08-01-00xx
Black Long
(for Sapphire 2000)
08-01-0600 08-01-0041
P&G 08-01-0006 08-01-0007
 
Notes:-
  1. The fader was changed during but the serial number of the change is unknown. Check inside the console, if the faders are individually mounted then the faders are shown on the early consoles line, otherwise the faders are shown on the late console line!
     
  2. If the serial number is near the one shown check with Avolites to ensure you are ordering the correct fader, or check the PCB which mounts the faders if it is 1201-4750A then the console is a type A if the console uses a pcb type 1201-4750B then the console is type B.
  3. Fader Cleaning 
    Faders will get dirt inside them over time and combined with the wearing of the fader track this can cause intermittent faults.Faders can be cleaned and if done correctly this will lengthen the life of a fader.
    At Avolites we have done extensive test on the use and over-use of DeOxid F5  fader cleaning  agent, and have created a video with instructions.  
    Although DeOxid F5 is widely available, in case that you can not obtain this there are alternatives that have been proven to work in the field: “Servisol Super 10”  Farnell PN 278786
    “Kontakt Chemie Cleaner 601” Farnell PN 801021 
    Follow the same instructions as for DeOxid F5 for the above agents. There is no benefit in cleaning working faders with any of the above agents, therefore we do not advice to do so if the product is in a particularly dusty environment, simply clean with a dry
Knob colours

xx = 29 white
xx = 31 grey

Avolites Console Faders
Avolites Console Faders
08-01-0200
60mm Narrow Alpha Fader

08-01-0200
Click here to buy

 

08-01-0300
60mm Wide Alpha Fader RA60B1

08-01-0300
Click here to buy

 

08-01-0400
60mm Mastering Sellmark Fader LSVA-610

08-01-0400
Click here to buy

 

08-01-0500
45mm Preset Alpha Fader RA45D1

08-01-0500
Click here to buy

 

08-01-0600
60mm Preset Alpha Fader RA60D1

08-01-0600
Click here to buy